Machinery and Systems by Production Stage
Each system addresses a distinct production stage: forming engineered flooring elements, machining board edge geometry, or preparing and finishing the wood surface.
Cold Lamination Systems for Engineered Wood Flooring
Digital flooring presses and glue spreading machines combine controlled adhesive application with digitally managed hydraulic pressing. Configurations range from standalone machines to integrated cold lamination lines with material handling and automation.
Wood Flooring Pretreatment and Finishing Systems
Systems cover surface brushing and structuring, intermediate sanding, coating application, buffing and wiping, with classic UV, LED UV and hybrid curing options. Configurations range from individual machines to digitally self-configuring finishing lines, multi-step systems and scalable material-handling automation.
RoboPROF - One-Pass Wood Flooring Profiling and End-Matching
A different production concept that brings complete wood flooring profiling into one machine.
Conventional flooring production typically uses separate machines for long-side profiling and short-side profiling (end-matching), with intermediate material transfers and coordinated setup between machines. RoboPROF integrates both operations into one compact, fully robotic and digitally self-configuring machine designed to complete the full profiling process in a single board pass.
One Machine. One Pass. One Logic.
01
Integrated Profiling Architecture
Long-side profiling and short-side end-matching are coordinated within one machine, reducing separate machining stations and intermediate material transfers.
02
Digital Self-Configuration
Production parameters define the machining positions and operating conditions required for the selected flooring format, reducing manual setup between production changes.
03
Compact and Expandable Machine Platform
The complete profiling process is contained within a compact stand-alone machine that can also be integrated with conveyors and automated material handling when required.
Integrated Production Lines and Factory Systems
Projects can begin with a standalone machine or an integrated line for one production stage, then expand through additional machinery, material handling, and automation into a wider factory system.
Deck Art Machines can provide production-process planning, factory layout and material-flow engineering, installation, commissioning, operator training, production-technology training and production start-up support within the agreed project scope.
Example: Scaling a Wood Flooring Finishing System
The example below shows how a finishing project can expand from a standalone production line to an integrated pretreatment and finishing configuration and then to an automated multi-step system.
Standalone Wood Flooring Finishing Line
Integrated Pretreatment and Finishing Line
A standalone line combines coating application, buffing, wiping and curing in one compact production system.
Surface pretreatment and finishing are connected within one coordinated production line.
Automated Multi-Step Finishing System
The system can expand into multi-stage processing with integrated conveyors, gantry material handling and project-specific automation.
Engineering Grounded in Direct Flooring Production Experience
Deck Art Machines developed its machinery from direct experience in engineered wood flooring manufacturing. That background revealed how material variation, machine setup and the relationship between lamination, profiling and finishing can affect production efficiency and final product quality. Those practical production requirements became the foundation for flooring-specific machinery and integrated systems.
Over the years, the company has delivered machinery across Europe, Australia, Canada and the United States, spanning earlier and current generations. Today’s cold-lamination and finishing platforms are each built on two previous generations.
The company’s flooring profiling experience began with adapting conventional machinery and developing digital control and self-configuring operations to meet real flooring production requirements. Those lessons, combined with first-hand experience of producing engineered wood flooring and using the machinery available on the market, led to RoboPROF - a purpose-built platform developed from the ground up to integrate long-side and short-side profiling in one digitally self-configuring machine.
01
Flooring-Specific Engineering
Machines are developed around wood flooring dimensions, workflows, and process requirements from the outset, rather than beginning with a general-purpose woodworking concept.
02
Production Knowledge Built into Machine Control
Depending on the machine, production inputs such as board or plank dimensions, pressure, adhesive quantity, tongue-and-groove profile geometry, or finishing recipe are translated into coordinated machine setup and operating parameters.
03
Production Stages Considered as One Process
Engineering decisions consider how material condition and the result of one production stage can influence the stages that follow, helping define the machinery and system configuration for the intended flooring product.
Project Implementation, Production Optimisation and Technical Support
Start with a rational initial configuration. Optimise it under real production conditions. Expand when operating requirements justify it.
-
Deck Art Machines works closely with customers during implementation, commissioning and production start-up. Where the connected machine architecture allows, remote diagnostics, control, parameter tuning, and software updates support adjustment to actual materials, flooring formats, workflows, and operating conditions.
-
Each project begins with the safest rational configuration for the immediate production requirement and a considered future expansion path. Additional preparation equipment, machinery, conveyors, gantry handling or automation are evaluated when real operating evidence shows that they are justified.
Step 01
Define the Initial Configuration
The starting machinery or system scope is defined around the intended flooring product, board or plank dimensions, material condition, target output, existing equipment, available space and realistic operating requirements.
Step 02
Implement and Start Production
Installation, commissioning, operator training and production-technology support establish the machinery or system within the customer’s actual production environment and agreed operating conditions.
Step 03
Analyse, Tune and Optimise
Where the connected machine architecture allows, operating parameters, machine dynamics and software functions can be analysed and adjusted remotely around observed production scenarios.
Step 04
Expand When Justified
Future additions are defined from actual operating experience and may include preparation equipment, connected conveyors, material handling, gantry automation or wider production-system integration.
Discuss Your Production Requirements
Tell us what you plan to produce, which production stage you want to develop and the operating conditions that matter to the project. We can then begin defining a rational machinery or system configuration, the required implementation scope and a considered path for future expansion.
Deck Art Machines delivers machinery and integrated systems worldwide, with installation, commissioning, operator training, and remote technical support available according to the configuration, destination, and agreed project scope.
Information for an Initial Project Review
Where available, include the intended flooring product, materials and dimensions, required production process, target output, existing machinery, available factory space and the main production challenge you want to address.
Direct Contact
Address:
Milivoja Cobanskog 202,
21460 Vrbas, Serbia.
Phone Landline:
+381 21 794220
​
Mobile/WhatsApp/Viber:
+381 63 7241147
Email:
